 Friends links |
|
| Picture |
Heading |
Updated |
 |
Manganese Brass
Manganese brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.The fluxes |
2017-12-23 |
 |
Tin Bearing Silver Phoscopper Brazing Alloy
tin bearing silver phoscopper brazing alloy The product is used for brazing of copper and copper alloys. It has a lower melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is |
2017-12-20 |
 |
Silicon Brass
Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should |
2017-12-18 |
 |
Silver-copper-nickel Brazing Alloys
silver-copper-nickel brazing alloys is a kind of silver-based solid solution. It has good properties such as high mechanical strength, good plasticity and electrical conductivity. It is applied to the brazing of ferrous metals and non-ferrous metals, such |
2017-12-12 |
 |
Copper Nickel Alloys
Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc. |
2017-12-09 |
 |
Bronze Brazing Paste
After the preparation of bronze brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage. Product is suitable for brazing copper, bronze and steel, et |
2017-11-16 |
 |
Silicon Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean |
2017-11-07 |
 |
Low-silver Copper Phosphorus Brazing Alloy
The product is used for brazing of copper and copper alloys. It has low melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is unnecessary when brazing copper. |
2017-10-14 |
|
